STOPAQ® Wrappingband EZLT
STOPAQ® Wrappingband EZLT
STOPAQ® Wrappingband EZLT
STOPAQ® Wrappingband EZLT
stopaq-wrappingband-ezlt
stopaq-wrappingband-ezlt
STOPAQ®
Stopaq® Wrappingband EZLT is a corrosion preventing material intended to be used for a wide range of structural and flat applications in atmospheric conditions where water ingress and/or corrosion is a problem. Stopaq® Wrappingband EZLT is easy to install and offers excellent sealing and corrosion prevention. Stopaq® Wrappingband EZLT shows excellent cold applied adhesion properties without extensive surface pre-treatment to various substrates.
Stopaq® Wrappingband EZLT is a prefabricated coating specifically designed for sealing and corrosion prevention in low temperature applications (Max +50oC) for commercial, residential, utilities, telecommunications, transportation, electrical, water, wastewater, agricultural, and industrial uses.
It contains a reinforcement fibre mesh and a polyester fibre top layer that allows immediate coating after installation. It has excellent adhesion properties without extensive surface treatment on various substrates like bare or coated steel. The material does not cure and offers long-term performance. Stopaq® Wrappingband EZLT requires a protective topcoat layer for UV and debris protection.
The recommended topcoat for Stopaq®Wrappingband EZLT is the flexible STOPAQ® EZ Topcoat.
Other types of topcoats may also be used, such as 2-component polysiloxanes, epoxies, polyurethanes, or 1-component waterborne acrylics. Please consult Presserv for additional information. The thickness of 2mm provides excellent wetting properties on uneven surfaces.
Read more
Stopaq® Wrappingband EZLT is a prefabricated coating specifically designed for sealing and corrosion prevention in low temperature applications (Max +50oC) for commercial, residential, utilities, telecommunications, transportation, electrical, water, wastewater, agricultural, and industrial uses.
It contains a reinforcement fibre mesh and a polyester fibre top layer that allows immediate coating after installation. It has excellent adhesion properties without extensive surface treatment on various substrates like bare or coated steel. The material does not cure and offers long-term performance. Stopaq® Wrappingband EZLT requires a protective topcoat layer for UV and debris protection.
The recommended topcoat for Stopaq®Wrappingband EZLT is the flexible STOPAQ® EZ Topcoat.
Other types of topcoats may also be used, such as 2-component polysiloxanes, epoxies, polyurethanes, or 1-component waterborne acrylics. Please consult Presserv for additional information. The thickness of 2mm provides excellent wetting properties on uneven surfaces.
Read more
Stopaq® Wrappingband EZLT is a prefabricated coating specifically designed for sealing and corrosion prevention in low temperature applications (Max +50oC) for commercial, residential, utilities, telecommunications, transportation, electrical, water, wastewater, agricultural, and industrial uses.
It contains a reinforcement fibre mesh and a polyester fibre top layer that allows immediate coating after installation. It has excellent adhesion properties without extensive surface treatment on various substrates like bare or coated steel. The material does not cure and offers long-term performance. Stopaq® Wrappingband EZLT requires a protective topcoat layer for UV and debris protection.
The recommended topcoat for Stopaq®Wrappingband EZLT is the flexible STOPAQ® EZ Topcoat.
Other types of topcoats may also be used, such as 2-component polysiloxanes, epoxies, polyurethanes, or 1-component waterborne acrylics. Please consult Presserv for additional information. The thickness of 2mm provides excellent wetting properties on uneven surfaces.
Read more
Stopaq® Wrappingband EZLT is a prefabricated coating specifically designed for sealing and corrosion prevention in low temperature applications (Max +50oC) for commercial, residential, utilities, telecommunications, transportation, electrical, water, wastewater, agricultural, and industrial uses.
It contains a reinforcement fibre mesh and a polyester fibre top layer that allows immediate coating after installation. It has excellent adhesion properties without extensive surface treatment on various substrates like bare or coated steel. The material does not cure and offers long-term performance. Stopaq® Wrappingband EZLT requires a protective topcoat layer for UV and debris protection.
The recommended topcoat for Stopaq®Wrappingband EZLT is the flexible STOPAQ® EZ Topcoat.
Other types of topcoats may also be used, such as 2-component polysiloxanes, epoxies, polyurethanes, or 1-component waterborne acrylics. Please consult Presserv for additional information. The thickness of 2mm provides excellent wetting properties on uneven surfaces.
Read more
Main Features
Constant film thickness at irregular shapes, corners and uneven surfaces.
Surface tolerant - e.g. for steel substrates blasting techniques are not required, wire brushing is sufficient (ISO 8501-1: St 2)
Resistant to ageing, weathering, osmosis, and moisture migration beneath the film
Safe to use. No physical, health or environmental hazards.
Main Features
Constant film thickness at irregular shapes, corners and uneven surfaces.
Surface tolerant - e.g. for steel substrates blasting techniques are not required, wire brushing is sufficient (ISO 8501-1: St 2)
Resistant to ageing, weathering, osmosis, and moisture migration beneath the film
Safe to use. No physical, health or environmental hazards.
Main Features
Constant film thickness at irregular shapes, corners and uneven surfaces.
Surface tolerant - e.g. for steel substrates blasting techniques are not required, wire brushing is sufficient (ISO 8501-1: St 2)
Resistant to ageing, weathering, osmosis, and moisture migration beneath the film
Safe to use. No physical, health or environmental hazards.
Main Features
Constant film thickness at irregular shapes, corners and uneven surfaces.
Surface tolerant - e.g. for steel substrates blasting techniques are not required, wire brushing is sufficient (ISO 8501-1: St 2)
Resistant to ageing, weathering, osmosis, and moisture migration beneath the film
Safe to use. No physical, health or environmental hazards.
Usage
Above Ground Storage Tank (AST) corrosion
Construction-Related Protection
Corrosion on Structures
Corrosion Prevention
Leak Protection and Waterproofing
UV Protection
Voids and Interior Corrosion
Wind Turbine Corrosion
Usage
Above Ground Storage Tank (AST) corrosion
Construction-Related Protection
Corrosion on Structures
Corrosion Prevention
Leak Protection and Waterproofing
UV Protection
Voids and Interior Corrosion
Wind Turbine Corrosion
Usage
Above Ground Storage Tank (AST) corrosion
Construction-Related Protection
Corrosion on Structures
Corrosion Prevention
Leak Protection and Waterproofing
UV Protection
Voids and Interior Corrosion
Wind Turbine Corrosion
Usage
Above Ground Storage Tank (AST) corrosion
Construction-Related Protection
Corrosion on Structures
Corrosion Prevention
Leak Protection and Waterproofing
UV Protection
Voids and Interior Corrosion
Wind Turbine Corrosion
Product Type
Visco-Elastic Products
Leak Protection & Waterproofing
Above Ground Storage Tank Solutions
Product Type
Visco-Elastic Products
Leak Protection & Waterproofing
Above Ground Storage Tank Solutions
Product Type
Visco-Elastic Products
Leak Protection & Waterproofing
Above Ground Storage Tank Solutions
Product Type
Visco-Elastic Products
Leak Protection & Waterproofing
Above Ground Storage Tank Solutions
Files and documentation
Files and documentation
Files and documentation
Files and documentation
STOPAQ® Wrappingband EZLT
STOPAQ® Wrappingband EZLT
Variants
Extended Lifetime
STOPAQ® Wrappingband EZLT
Variant
Width:
Width:
Width:
200mm
200mm
200mm
Lenght:
Lenght:
Lenght:
10m
10m
10m
Package:
Box
Units/box:
2
Cover rate/unit:
1,8m^2
Add to My Products
Add to My Products
Add to My Products
Add to My Products
Relevant Case Histories
Extended Lifetime
Load More Cases
